- Ideal for speedy eaters
- Softer, lighter & less confining than other muzzles
- Well-ventilated & soft on teeth and lips
- UV protection
The KM Elite ThinLine Flexible Filly Grazing Muzzle is lightweight, less confining and softer than most horse grazing muzzles. Constructed of a durable and pliable material that radically improves comfort, it is also soft on equine teeth and lips. The Flexible Filly Muzzle is well-ventilated and safe, rated to break just before your turnout halter. Made from one of the most durable polymers on the planet, the ThinLine Flexible Filly Grazing Muzzle is fungal, mould and UV resistant.
Featured in Dr David Marlin's survey in April 2023 of grazing muzzles and scored the highest overall (83%) and was top in 5 out of the 8 categories. Read more here.
Key Fitting Instructions:
We recommend that you use a well-fitting breakaway turnout headcollar to your muzzle. Only use the provided ties that are specifically designed to break before your headcollar in an emergency. Replacement ties are available to buy.
1. Use the enclosed paper ties or a string to discover the best holes to secure your muzzle to your halter. The paper ties are a temporary tool allowing you to easily adjust the fit.
2. Two of the “fins” have a triangle cut out. These attach to the square (side) rings on your turnout halter. Three fins will connect to the noseband, one in the centre, the other two fall naturally to the sides of the centre. Three fins will connect to the chin band; one in the centre, two naturally to the sides of the centre.
3. Secure each triangle cut out fin with one of the enclosed low profile cable ties. Do not wrap the fins around the halter, doing so may cause rubs.
4. When properly fastened, the muzzle should be close to but not touching the nose of the horse. If the muzzle is touching the nose simply make the fins under the chin longer, this will lift the muzzle away from the nose.
5. Once you are satisfied you have the correct holes aligned to the halter please remove the paper ties or string and permanently secure the muzzle with the included cable ties.
6. After finding the best fit for your horse, simply trim the excess fin material just above the top hole being used. It is fine to wait a day or two to ensure your muzzle is a comfortable distance from your horse’s mouth before trimming. The “keeper” on the cable tie is on the outside of the muzzle and the excess is facing down and trimmed close.
The fins should not move along the noseband. If it does simply pull the cable tie tighter.
Useful information
Vets recommendations for grazing muzzles hole sizes are as follows:
24/7 Full-time grazing in a muzzle; 3.5 to 4 cm and restricted grazing for horses who require substantially less sugar intake; 2 to 2.5 cm.
Warranty Information
Flexible Filly Grazing Muzzles come with a full 6-month product replacement warranty. Please follow these directions to qualify for a 30-day product satisfaction refund.
Before you return, please email 2 photos of your horse wearing the muzzle. One grazing and one not grazing. Please send to info@thinlineglobal.eu. This way we can make sure it is fitting properly and offer guidance if needed.
**It is our experience this muzzle works on every horse when owners have the correct size and it is fitted properly and secured. We are here to help you become accustomed to this new patented design**
Size Guide
Available in sizes: Small (Mini - Pony 23 inches), Medium (Cob - Horse 24 inches), Large (Large Horse - Draft 25 inches).